PD9 KNX Occupancy Sensor

Occupancy detector LU XOMAT® PD9- DIM-KNX/EIB-FC for building services engineering, which based on KNX/EIBBUS-network (European Installation Bus)

Application examples:
offices, conference rooms, schools, nursery schools, hospitals

Application possibilities:
With integrated bus coupler! Connection via WAGO standard bus connector „„When using the BEG_DIM_HKL_V4.0 application program, four different operating modes are available:

• Standard mode (semi-automatic or fully automatic mode (switching)
• Semi-automatic or fully automatic mode with daylight-dependent regulation (dimming)
• Slave mode
• NEW: Permanent dimmer (light control that is not dependent on presence)

Specification of three target values: Two target values are regulated (specified in Lux) and one target value is a fixed setpoint (specified in %)
Target values can be changed using a communication object.
Soft start to slowly switch on the lighting to the target value
Reflection factor for improved adjustment to the ambient conditions
NEW: HVAC channels (switch channels) can now be switched using a pushbutton

Main communications objects:
1. 1x switch outlet or 2x light regulator outlets
2. 2x switch channels for occupancy detection or activation of HVAC systems (HVAC= heating, ventilation, air conditioning)
3. Issuing of the currently measured lux value

- Read less